ALUCOBOND® A2 is our very beautiful and non-combustible aluminium composite panel which is used in architecture that fulfils all the respective standards worldwide. Thanks to its mineral-filled core, ALUCOBOND® A2 meets all the strict requirements of all the fire regulations and enhances all the possibilities for the concept and design of any buildings. ALUCOBOND® A2, just like all the products of the ALUCOBOND® family, which will always allow simple processing, is impact-resistant, break-proof including weatherproof and, above all, a very beautiful non-combustible panel.
Required thickness and actual weights of panels with same rigidity
| ALUCOBOND® A2 | Aluminium | ||||
|---|---|---|---|---|---|
| Rigidity (E•I) | Section modulus | Thickness | Weight | Thickness | Weight |
| 1250 kN cm²/m | 1.25 cm³/m | 3 mm | 5.9 kg/m² | 2.7 mm | 7.3 kg/m² |
| 2400 kN cm²/m | 1.75 cm³/m | 4 mm | 7.6 kg/m² | 3.3 mm | 8.9 kg/m² |
Thickness: 3/4mm
* Exception: ALUCOBOND® natural Reflect is only available in ALUCOBOND® PLUS in width 1250 mm.
Due to manufacturing, a displacement of the cover sheets sidewise at the panel edges up to 2 mm is possible.
Thickness: ± 0,2 mm
(mill-finish | stove lacquered | anodized)
Width: - 0 / + 4 mm
Lengths: 2000 - 4000 mm; - 0 / + 6 mm
Lengths: 4001 - 6800 mm; - 0 / + 10 mm
More colours and surfaces are also available upon any request.
However they are subject to our minimum order quantities.
ALUCOBOND® PLUS is a very beautiful composite panel which consisting of two aluminium cover sheets and a mineral-filled polymer core. The superb properties of this very beautiful material boost one’s inspiration which also offer architecture a whole new range of solutions – whether your project is a private home, or a public building, maybe even a corporate headquarter and offices, or any trading or industrial complex – or if your organisation just wants to create a new image-building Corporate Design – whether for a petrol station or a car showroom, or maybe a bank or maybe even supermarkets. ALUCOBOND® even offers a multitude of application options in the Transport & Industry sector.
Required thickness and actual weights of panels with same rigidity
| ALUCOBOND® PLUS | Aluminium | ||||
|---|---|---|---|---|---|
| Rigidity (E•I) | Section modulus | Thickness | Weight | Thickness | Weight |
| 1250 kN cm²/m | 1.25 cm³/m | 3 mm | 5.9 kg/m² | 2.7 mm | 7.3 kg/m² |
| 2400 kN cm²/m | 1.75 cm³/m | 4 mm | 7.6 kg/m² | 3.3 mm | 8.9 kg/m² |
Thickness: 3/4mm
(6mm on request)
Due to manufacturing, a displacement of the cover sheets sidewise at the panel edges up to 2 mm is possible.
Thickness: ± 0,2 mm
(mill-finish | stove lacquered | anodized)
Width: - 0 / + 4 mm
Lengths: 2000 - 4000 mm; - 0 / + 6 mm
Lengths: 4001 - 6800 mm; - 0 / + 10 mm
More colours and surfaces are also available upon any request.
However they are subject to our minimum order quantities.
* Anodized according to DIN 17611. All anodized ALUCOBOND® PLUS composite panels have a contact line (about 25 mm width) on their short sides. For any panel lengths of more than 3500 mm, the composite panels also have contact lines (about 2-3 mm width) on their long sides. The maximum panel length is 6500 mm. Please take this into account and in to your consideration when dimensioning the panels.
